Rokonet ORBiT-14 User Manual Page 51
- Page / 70
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
Installation and Programming Manual
51
ZONES: ZONE TYPE (cont’d)
Quick Key Item Default Explanation
ZONE TYPE (cont’d)
0 Instant default for
all zones
except
1 and 2
§ usually intended for non-entry/exit doors, window
protection, shock detection (but generally NOT for
motion detectors)
§ causes an immediate intrusion alarm if violated (after
the expiration of the Exit Delay)
0 I+Exit/Entry 1
(Interior+Exit/Entry 1)
---
§ usually assigned to motion detectors and to interior
doors protecting the area between the entry door and
the keypad
§ if the system is armed to the AWAY (Arm) mode: a
zone(s) so programmed will provide a delay (specified
by Exit/Entry 1) allowing entry within, and exit from, an
armed premises
§ if the system is armed to the STAY mode:
a zone(s) so programmed will be bypassed
2 3 xx
+
E
N
T
E
R
0 I+Exit/Entry 2
(Interior+Exit/Entry 2)
--- § usually assigned to motion detectors and to interior
doors protecting the area between the entry door and
the keypad
§ if the system is armed to the AWAY (Arm) mode: a
zone(s) so programmed will provide a delay (specified
by Exit/Entry 1) allowing entry within, and exit from, an
armed premises
§ if the system is armed to the STAY mode:
a zone(s) so programmed will be bypassed
IMPORTANT NOTE:
§ for greater security when arming to the “STAY” mode, it
is possible for the user to eliminate the Entry Delay
period associated with any zone(s) classified as
Entry/Exit 1–by pressing the [STAY] key twice in
succession when arming the system
§ in effect, doing so makes it an INSTANT zone during
the “STAY” mode of operation
0 I+Exit(OP)/Entry
(Interior+Exit(OP)/Entry)
---
§ used for an entry/exit door that, for convenience, may
be kept open when the system is disarmed
§ if the system is armed to the AWAY (Arm) mode:
refer to the explanation in Zone Type 03, above
§ if the system is armed to the STAY mode:
the zone will be bypassed
2 3 xx
+
E
N
T
E
R
0 I+Entry Follow
(
Interior+Entry Follower)
--- § generally used for motion detectors and/or interior
(e.g. foyer) doors which would have to be violated, after
entry, in order to disarm the system
§ if the system is armed to the AWAY (Arm) mode: refer
to the explanation in Zone Type 04, above
§ if the system is armed to the STAY mode: the zone will
be bypassed
1 I+Instant
(Interior+Instant)
---
§ usually assigned to motion detectors unaffected by user
movements during the Entry Delay period
§ if the system is armed to the AWAY (Arm) mode:
a violation of this zone causes an immediate intrusion
alarm (after the expiration of the Exit Delay period)
§ if the system is armed to the STAY mode:
the zone will be bypassed
1 UO Trigger --- § used for a device or zone, which, if violated (at any
time) will trigger a previously-programmed Utility
Output, capable of activating an external indicator,
relay, appliance, etc.
INSTALLER PROG:
2)ZONES ↓↓
- Main Board 1
- Zone Expansion 1
- Wireless Expansion 2
- Partitions 2
- Self Monitoring 5
- False Alarm Reduction 5
- Synoptic Map 5
- Figure 1-2 6
- Power Supply Expansion Module 10
- Event Log Expansion Module 10
- Printer Module 10
- X-10 Transmitter Module 10
- Total Auxiliary 18
- Maximum Current 18
- Draw per Branch 18
- Figure 2-1 19
- Figure 2-2 20
- Figure 2-3 21
- Zone Terminations 22
- Figure 2-5 23
- Figure 2-6 24
- Wiring Diagram 25
- PROGRAMMING METHODS 26
- Table 3-1 26
- * Not for UL Installations 26
- For Options 1 and 2 27
- 7- Apply Power to the System 27
- ↓↓ 28
- Figure 3-1: The LCD Keypad 30
- INSTALLER PROG: 33
- 1)SYSTEM ↓↓ 33
- IMPORTANT: 37
- (on pages 40 through 112) 39
- 1) System 40
- INSTALL PROG: 40
- SYSTEM: TIME DEFINE (cont’d) 41
- SYSTEM: SYSTEM CONTROL 42
- SYSTEM: SYSTEM LABEL 46
- SYSTEM LABELS: 46
- 1)PARTITION 1 46
- SYSTEM: SERVICE INFORMATION 47
- 2)ZONES ↓↓ 48
- ZONES: ZONE TYPE (cont’d) 51
- ZONES: ZONE SOUND 53
- Loop 54
- Response 54
- 2)SYSTEM ↓↓ 58
- Bell Follow 63
- No Telephone Line 63
- Communication 63
- Trouble Follow 63
- Ground Pulse 64
- Low Battery Follow 64
- AC Loss Follow 64
- Sensors Test 64
- UTILITY OUTPUT: PARTITION 65
- P=12345678 UO=xx 65
- Y 65
- 3) UO ↓↓ 66
- UTILITY OUTPUT: ZONE 67
- UTILITY OUTPUT: CODE 68
- UTILITY OUTPUT (cont’d) 69
- 4) Code Maintenance 70
Related products and manuals for Security access control systems Rokonet ORBiT-14
(8 pages)
(31 pages)© 2020, manymanuals.com. All rights reserved. | 0.898 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals