Rokonet ORBiT-14 User Manual Page 65
- Page / 70
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
Installation and Programming Manual
65
UTILITY OUTPUT: PARTITION
Quick Key Utility Output Follows Default Explanation
PARTITION
--- § the Utility Output will follow the chosen
Partition Event, selected among those listed
below:
from this display:
§ designate the partition(s) whose READY condition
will activate the chosen Utility Output by using the
[STAY] key to toggle between YES (Y) or NO (,,)
and either the [STAT] or [BYP] keys to move the
cursor left or right, respectively, as you make your
choices the “xx” in the UO=xx designation refers
the number of the UO currently being programmed
after making your selection, press [ENTER]
§ proceed to PATTERN of OPERATION, and
setting the duration of operation.
0
Ready Follow
--- § activates the designated Utility Output whenever
the selected partition(s) is in the READY state;
select by pressing [ENTER]
0
Alarm Follow
--- § activates the designated Utility Output whenever
the selected partition(s) experiences any ALARM;
select by pressing [ENTER]
0
Arm Follow
--- § activates the designated Utility Output whenever
the selected partition(s) is armed to either the
AWAY or STAY mode; select by pressing
[ENTER]
0
Burglary Follow
--- § activates the designated Utility Output whenever
the selected partition(s) experiences a
BURGLARY (intrusion) alarm; select by pressing
[ENTER]
0
Fire Follow
§ activates the designated Utility Output whenever
the selected partition(s) experiences a FIRE
alarm–either when a FIRE zone is triggered, or
when a keypad’s FIRE alarm keys ( [4] and [5] )
are
§ simultaneously pressed; select by pressing
[ENTER]
0
Panic Follow
--- § activates the designated Utility Output whenever
the selected partition(s) experiences a PANIC
alarm– either when a PANIC zone is triggered, or
when a keypad’s PANIC alarm keys ( [1] and [2] )
are simultaneously pressed; select by pressing
[ENTER]
0
Auxiliary emergency
Follow
--- § activates the designated Utility Output whenever
the elected partition(s) experiences a AUXILIARY
EMERGENCY alarm–either when a AUXILIARY
EMERGENCY zone is triggered, or when a
keypad’s AUXILIARY EMERGENCY alarm keys (
[7] and [8] ) are simultaneously pressed; select by
pressing [ENTER]
0
Duress Follow
--- § activates the designated Utility Output whenever
the selected partition(s) experiences a DURESS
alarm (initiated at the keypad); select by pressing
[ENTER]
0
Buzzer Follow
--- § activates the designated Utility Output whenever a
keypad in the chosen partition sounds its BUZZER
during Auto-Arming, Entry-Exit Delays, and alarm
conditions; select by pressing [ENTER]
P=12345678 UO=xx
Y.......
INSTALLER PROG:
3) UO ↓↓
- Main Board 1
- Zone Expansion 1
- Wireless Expansion 2
- Partitions 2
- Self Monitoring 5
- False Alarm Reduction 5
- Synoptic Map 5
- Figure 1-2 6
- Power Supply Expansion Module 10
- Event Log Expansion Module 10
- Printer Module 10
- X-10 Transmitter Module 10
- Total Auxiliary 18
- Maximum Current 18
- Draw per Branch 18
- Figure 2-1 19
- Figure 2-2 20
- Figure 2-3 21
- Zone Terminations 22
- Figure 2-5 23
- Figure 2-6 24
- Wiring Diagram 25
- PROGRAMMING METHODS 26
- Table 3-1 26
- * Not for UL Installations 26
- For Options 1 and 2 27
- 7- Apply Power to the System 27
- ↓↓ 28
- Figure 3-1: The LCD Keypad 30
- INSTALLER PROG: 33
- 1)SYSTEM ↓↓ 33
- IMPORTANT: 37
- (on pages 40 through 112) 39
- 1) System 40
- INSTALL PROG: 40
- SYSTEM: TIME DEFINE (cont’d) 41
- SYSTEM: SYSTEM CONTROL 42
- SYSTEM: SYSTEM LABEL 46
- SYSTEM LABELS: 46
- 1)PARTITION 1 46
- SYSTEM: SERVICE INFORMATION 47
- 2)ZONES ↓↓ 48
- ZONES: ZONE TYPE (cont’d) 51
- ZONES: ZONE SOUND 53
- Loop 54
- Response 54
- 2)SYSTEM ↓↓ 58
- Bell Follow 63
- No Telephone Line 63
- Communication 63
- Trouble Follow 63
- Ground Pulse 64
- Low Battery Follow 64
- AC Loss Follow 64
- Sensors Test 64
- UTILITY OUTPUT: PARTITION 65
- P=12345678 UO=xx 65
- Y 65
- 3) UO ↓↓ 66
- UTILITY OUTPUT: ZONE 67
- UTILITY OUTPUT: CODE 68
- UTILITY OUTPUT (cont’d) 69
- 4) Code Maintenance 70
Related products and manuals for Security access control systems Rokonet ORBiT-14
(8 pages)
(31 pages)© 2020, manymanuals.com. All rights reserved. | 0.930 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals