Rokonet ORBiT-14 User Manual download pdf (Page 53)

Installation and Programming Manual

ZONES: ZONE SOUND

Quick Key Item Default Explanation

Zone

Sound

ZONE SOUND

---

§ programs ONLY the sounds produced when each of

the system’s zones triggers an alarm

§ reports to the Central Station, if programmed, are

unaffected by any of the following selections

§ to program the Zone Sound for any zone:

a) from this display, press [ENTER]

b) specify its two-digit Zone Number

c) press [ENTER] again, and select among the

following:

1 Silent § no sound is produced

2 Bell Only Default

for

all zones

§ activates the external sounder(s) for the duration of

the Bell Timeout interval, or until a User Code is

entered, followed by use of the [ENTER] key

3 Buzzer Only § activates each keypad’s internal piezo “buzzer”

4 Bell + Buzzer § the external sounder(s) and the keypads’ “buzzer(s)”

are activated simultaneously

2 4 xx

5 Door Chime § besides offering security protection, the Door Chime

designation is generally used as an audible

annunciator to indicate the violation of a zone(s)

during the disarmed period

§ if the system is DISARMED:

a momentary annunciation will be heard from the

system’s keypad(s) whenever the zone is violated after

being secured

§ if the system is ARMED:

only the external sounder(s) will produce the alarm

INSTALLER PROG:

2)ZONES ↓↓

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 69 70

No comments

Rokonet ORBiT-14 User Manual Page 53