Rokonet Orbit-6 User Manual download pdf (Page 13)

Installer Manual

Operation Action Comments

Enter the

Installer

Programming

mode

enter the factory default

Installer Code (0-2-0-6);

followed by #

a long beep will sound, confirming

successful entry into Installer

Programming

Access the

current Installer

Code

(stored in location

“08”)

press [0], [8], [ARM] no confirming beep will sound

Enter a unique

Installer Code

(for this tutorial,

we’ll use 3-0-5-7)

enter [3], [0], [5], [7] no confirming beep will sound

Store the data

you have entered

press [#] a long beep will sound confirming that

data has been properly stored

if a wrong number of digits entered

three (error) beeps will sound after

pressing #

press

keys

displayed zone

LEDs

lit

value

none 1

digit 2, 1 3

STAY

digit none 0

STAY

digit 3,1 5

STAY

digit 3,2,1 7

Check the data

stored in Location

“08”

•the first digit of the stored

data will appear

•observe the Zone LEDs

•press [STAY] [STAY] to

advance to the next digit

•once all four digits have

been displayed, attempts to

view an additional digit will

result in three (error) beeps

•if desired, press [STAY]

and [ARM] to move

backwards

Go to another

location of your

choice

press the desired two-digit

location and [ARM]

press [ARM] alone to go to the next

sequential location

Exit

programming

enter your Installer Code

and press [ARM]

a long beep will confirm your actions

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 36 37

Comments to this Manuals

No comments

Rokonet Orbit-6 User Manual Page 13

Comments to this Manuals

Related products and manuals for Security access control systems Rokonet Orbit-6