Rokonet Orbit-6 User Manual download pdf (Page 22)

Installer Manual

Duress Code Follow (Latched)

UO is activated when any duress code is entered. The UO deactivates either when

arming the system or disarming the system due to an alarm that was activated from the

emergecy keypad keys, 24-hour zone violation or tamper zone violation.

Follow Chime (Pulse) (Ver. 1.2) UO is activated for several seconds whenever a

keypad sounds its chime.

Follow Bell Latched NO (Ver. 1.2) UO is activated whenever the bell is activated. UO

is deactivated at the bell cut-off time.

Follow Bell Latched NC (Ver.1.3)

Follow Ready NO (Ver.1.3) UO is activated whenever the system is in the ready state.

Locations: 22 23 24 25

COMMUNICATION PARAMETERS: LOCATIONS 26–29

Locations 26 and 27 allow you to define the manner in which the ORBIT-6 communicates with the

Central Station when it reports alarms, restorals, troubles, openings/closings, and tests.

Digital Communicator Controls: Location 26

• First digit: determines the number (or hexadecimal digit) corresponding to the

Dialing Method / Duty Cycle / Redial Time desired

• Second digit: determines the number corresponding to the

Attempts / Answering Machine Use / UL Installation

Attempts

Answering Machine

in Use

UL Installation Voice Module

Attempts sets the

number of times the

ORBIT-6 will redial

the Central Station

after failing to

establish a

successful

communication.

If enabled to defeat an

answering machine, two

phone calls must be

made to the premises. On

the first call let the phone

ring once (by pushing the

space bar on the U/D

software keyboard). The

panel detects this ring

and starts a 60sec timer

during which the panel

will answer the next call

on the first ring.

If the ORBIT-6 is installed

in accordance with UL

requirements, for a

Residential Installation

(UL 1641), the operation of

the unit’s Digital

Communicator must be

modified so as to disable

features, which are

inappropriate.

If enabled (“YES”) voice

messages will be sent. If

“NO” then tones will be

used to represent an active

alarm.

Location: 26 Dialer Controls: (1

Digit):

Digit Dialing Method Duty Cycle * Redial Central Station

8 DTMF N/A after 60 seconds

1 Pulse @ 20 pps 67/33 after 30 seconds

9 Pulse @ 20 pps 67/33 after 60 seconds

4 (default) DTMF N/A after 30 seconds

5 Pulse @ 20 pps 61/39 after 60 seconds

D Pulse @ 20 pps 61/39 after 60 seconds

3 Pulse @ 10 pps 67/33 after 30 seconds

B Pulse @ 10 pps 67/33 after 60 seconds

7 Pulse @ 10 pps 61/39 after 30 seconds

F Pulse @ 10 pps 61/39 after 60 seconds

* redial refers to the number of seconds the ORBIT-6 will wait before redialing a busy or unresponsive Central Station

phone number.

UO1

Action

UO2

Action

UO3

Action

UO4

Action

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 36 37

Comments to this Manuals

No comments

Rokonet Orbit-6 User Manual Page 22

Comments to this Manuals

Related products and manuals for Security access control systems Rokonet Orbit-6