Rokonet ORBiT-14 User Manual download pdf (Page 13)

User's Manual

Power LED

The Power LED indicates the status of system operation.

CONDITION DESCRIPTION

The system is operating properly from commercial (AC)

power; its backup battery is in good condition.

OFF

The system is inoperative due to lack of power (from both

commercial AC and backup battery); servicing is required.

FLASHING

(Disarm State)

Indicates a trouble condition; for more information on

displaying and attending to trouble conditions, see page 26.

NOTE:

If a trouble condition exists, the Power LED will flash only when the system is in its

disarmed state. Once the system is armed, a previously flashing Power LED will light

steadily.

Arm LED

The Arm LED indicates whether or not the system's intrusion detectors are

armed.

CONDITION EXPLANATION

The system's intrusion detectors are armed; subsequent

violations of a protected point or area (e.g., a door, a window,

unauthorized motion) will result in a burglar alarm.

OFF

The intrusion function of the system is disarmed.

FLASHING

Occurs when using the emergency keys on the keypad to send

panic, fire or special emergency alarms, or when viewing

alarms after disarming or when a tamper alarm has occurred

in the system.

Ready LED

The Ready LED indicates whether or not the system's intrusion zones are

secured and ready to be armed.

CONDITION EXPLANATION

All intrusion zones are secure; the system is ready to be

armed.

OFF

One or more intrusion zones are not secure and the system is

not ready to be armed. Before the system can be armed, the

condition must be addressed.

FLASHING

Indicates that one or more of the system's intrusion zones

have been

bypassed. For more information, see Zone

Bypassing, page 19).

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 41 42

Comments to this Manuals

No comments

Rokonet ORBiT-14 User Manual Page 13

Comments to this Manuals

Related products and manuals for Security access control systems Rokonet ORBiT-14