Rokonet ORBiT-14 User Manual download pdf (Page 25)

User's Manual

Keyswitch Arming

If your system is equipped with a special keyswitch, it can, with the twist of a

key, be toggled through Arm (Away) and Disarm modes.

Disarming

Disarming the System

Disarming your system deactivates its detectors. Remember, fire protection

and the protection offered by the keypad's emergency keys are always

armed and always available.

STEP DESCRIPTION

If outside the premises, open an "entry" door; the keypad(s) will

beep indicating that the Entry Delay period has begun.

Disarming an armed system:

Before the Entry Delay expires, enter your 4-digit User Code.

NOTE:

If you make a mistake when entering your User Code, the keypad will

produce three short beeps. If so, re-enter the above sequence correctly.

Silencing an Alarm

STEP DESCRIPTION

If outside the premises, open an "entry" door; the keypad(s) will

beep indicating that the Entry Delay period has begun.

Observe the keypad. If any of the following conditions is evident,

an alarm has occurred:

• The

ARM LED is flashing

• A Zone LED is lit steadily

• The

FIRE LED is lit steadily

3 Disarm the system by entering your User Code:

NOTE:

It is best to enter the premises only after police or a security company has

investigated and you are confident that the burglar is no longer on your

premises.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 41 42

No comments

Rokonet ORBiT-14 User Manual Page 25