Rokonet ORBiT-14 User Manual download pdf (Page 24)

User's Manual

Determining Which Group is Armed

The system must be armed.

 To identify the armed group(s)

STEP DESCRIPTION

Enter your 4-digit User Code followed by

NOTE:

If your system is defined with Quick Arming simply press the key.

The keypad’s first 3 Zone LED(s) corresponding to the armed

group(s) will light for several seconds.

Zone LED 1 represents Group 1.

Zone LED 2 represents Group 2.

Zone LED 3 represents Group 3.

NOTE:

If the system is armed in Away mode the Zone LEDs on the keypad will not light.

Quick Arming

Quick arming enables you to quickly arm the system.

NOTE:

Your installer should define Quick Arming.

 To quick arm using away arming:

✦ Press . The system is fully armed.

 To quick arm a group:

✦ Press

followed by the group number. The selected group(s) is

armed.

NOTES:

If the system is defined with Quick Arming, you can arm more than one group at the

same time. In effect arming one group on top of the other. For example:

If Group 1 is armed and you want to arm Group 2 simply press + [2] and Group

2 will be armed.

If the system is not defined with Quick Arming, then you cannot arm one group on top

of the other. In this case you can either arm only one group (

+ 1,2 or 3) or all

groups by using the option + [0]. For example:

If Group 1 is armed and you want to arm Group 2, then first you need to disarm

Group 1 and only then arm Group 2 using the sequence:

+ [2].

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 41 42

No comments

Rokonet ORBiT-14 User Manual Page 24