Rokonet ORBiT-14 User Manual download pdf (Page 28)

User's Manual

An additional zone(s) can be bypassed at the same time by adding its

number to the sequence. For example, to bypass Zones 05, 07 and 12,

press: [ 0 ] for 2 seconds + [ 5 ], [0] [7] [1] [2].

NOTES:

Only the first digit of the first zone should be pressed for 2 seconds.

The same sequence can “toggle” the bypass(es) during the disarmed period so that

they may be either applied or removed.

Determining Which Zone Is Bypassed

The system must be disarmed. If the keypad’s READY LED is flashing,

there is at least one bypassed zone, in the system.

 To identify the bypassed zone:

STEP DESCRIPTION

If quick bypass is enabled in your system, simply press:

Observe the keypad’s ZONES area. LED(s) corresponding to the

bypassed zone(s) will light for several seconds.

NOTES:

The READY LED, when flashing, indicates that there is one or more bypassed

zones. Any zone(s) bypassed during the disarmed period will remain bypassed

when the system is armed.

Zone(s) that are bypassed while the system is armed will automatically be restored

to the normal unbypassed condition when the system is disarmed.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 41 42

No comments

Rokonet ORBiT-14 User Manual Page 28