Rokonet ORBiT-14 User Manual download pdf (Page 36)

User's Manual

 To disable the Fire Alarm:

In certain cases, the keypad's

FIRE LED may remain lit steadily, even

though there is no alarm in progress and the system is disarmed.

USER FUNCTION DESCRIPTION AND REMEDY

The

FIRE LED

remains lit.

After a fire alarm has occurred and been silenced, the

keypad's red FIRE LED will remain lit steadily if a Smoke

Detector (presumably the one which caused the alarm)

remains tripped. Until reset, a tripped Smoke Detector will

prevent the

READY LED from being lit, and will NOT permit

the system to be armed.

To reset a tripped Smoke detector and to extinguish the red

FIRE LED, perform the following procedure:

+ USER CODE +

(Utility Output number

which is responsible for resetting the Smoke Detector)

Consult your Alarm company or Installer for alternate

information on resetting smoke detectors, if applicable.

Once done, the

Ready LED will indicate the system's status

and you will be able to arm your system.

NOTE:

You may need to perform this procedure several times in order to

prevent the smoke detector(s) from re-detecting any remaining

smoke.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 42

No comments

Rokonet ORBiT-14 User Manual Page 36