Rokonet ORBiT-14 User Manual download pdf (Page 34)

User's Manual

Section 7: System Troubles

Your ORBIT-14 is designed to report any troubles or malfunctions it may

detect. Notification that a problem exists is made to the user through

indications on the keypad(s) and, in many cases, to the Central Station and

to your dealer. Any incidence of trouble should be taken seriously and acted

upon immediately. If not remedied quickly, a trouble condition will likely

compromise your system and prevent it from properly doing its job.

The ORBIT-14 is designed to be as trouble-free as possible. In the event of

a problem, the POWER LED will flash about once every second. If this

happens, perform the sequence described below to determine the problem.

NOTES:

It is possible for more than one trouble to be present at the same time. If so, multiple

Zone LEDs will be lit simultaneously.

 To view trouble conditions:

STEP DESCRIPTION

Enter the User Functions Mode by pressing

and then select

View Troubles (3):

The keypad will beep and its LEDs will light, reflecting the

information below. After several seconds, the display will return

to normal.

TROUBLE DESCRIPTION LED RESPONSE

Low Battery The capacity of the

battery is low or

missing and needs

to be recharged or

replaced.

Zone 1

LED On

Contact your Alarm

Company or Installer.

AC Power Loss The commercial

power has been

interrupted; the

system will continue

to operate on its

standby battery as

long as possible.

Zone 2

LED On

Check that the

ORBIT-14's Plug-In

Transformer has not

been removed from its

outlet. If intact, contact

your Alarm Company or

Installer.

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 40 41 42

Comments to this Manuals

No comments

Rokonet ORBiT-14 User Manual Page 34

Comments to this Manuals

Related products and manuals for Security access control systems Rokonet ORBiT-14